Legal
General terms and conditions
Applicable to all offers and agreements of Marpat bv. Part I applies to everything; Part II applies additionally to repairs. This is a translation; in case of discrepancy, the Dutch version prevails.
Last updated: 27 September 2026. This version supersedes all previous versions.
Part I — General provisions
Article 1 — Scope
- Marpat bv is engaged in the repair and design of industrial electronics, the development of software, and the sale of new and refurbished industrial electronics.
- These general terms and conditions apply to all offers made by Marpat bv and to all agreements between Marpat bv and its client, hereinafter “the Client”.
- Marpat bv contracts exclusively with businesses. No agreements are concluded with consumers within the meaning of Book VI of the Code of Economic Law.
- Deviations apply only if expressly agreed in writing.
- The applicability of the Client’s purchasing or other terms and conditions is expressly rejected.
- If one or more provisions are invalid or void, the remaining provisions remain fully in force. The parties shall replace the invalid provision with a provision that comes as close as possible in purpose and scope.
- Failure to enforce a provision immediately does not affect the right of Marpat bv to do so at a later date.
Article 2 — Offers, formation and performance
- All offers are without obligation, unless expressly stated otherwise.
- An agreement is concluded only by agreement in writing, including confirmation by email or an order placed through the webshop.
- Additional work means everything that is supplied or performed during performance, whether or not recorded in writing, in excess of the agreed quantities or work.
- Marpat bv may engage third parties for the performance of an assignment. It remains responsible to the Client for the performance.
Article 3 — Prices and payment
- All prices are exclusive of VAT and other government levies, unless expressly stated otherwise.
- The prices apply only to the goods, services and work specified in the agreement. Anything supplied or performed in addition will be charged separately at the prices applicable at that time.
- Quoted prices are based on the purchase prices, taxes and other factors applicable at that time. If these change after the agreement has been concluded, Marpat bv may adjust the price.
- Invoices are payable in accordance with the agreed terms. Failing such terms, within 14 days of the invoice date.
- Upon the mere expiry of the payment term, the Client is in default and all claims become immediately due and payable. All amounts not paid on time shall bear, by operation of law and without notice of default, the statutory interest for late payment in commercial transactions, in accordance with the Act of 2 August 2002 on combating late payment in commercial transactions. If payment is still not made after a further term set by registered letter, the Client shall in addition owe fixed-rate damages of 10% of the outstanding amount, with a minimum of € 250.00, without prejudice to the right of Marpat bv to prove higher actual damage.
- Payments are applied first to interest and costs, and then to the longest outstanding invoices.
Article 4 — Delivery, acceptance and return of goods
- Quoted delivery times are indicative. Exceeding them does not give rise to any right to damages or termination, unless a binding term was stipulated in writing.
- The Client shall inspect the goods delivered immediately upon receipt. Visible defects and non-conforming deliveries must be reported in writing, with a description of the defect, within 8 days of receipt. Hidden defects must be reported within 8 days of discovery.
- No return is accepted without the prior written consent of Marpat bv. Goods returned without that consent remain at the Client’s expense and risk.
Article 5 — Warranty on goods sold
- Marpat bv grants a warranty of at least 6 months from delivery on goods sold. The actual warranty period may be longer, up to 12 months, depending on the item and its supplier. The applicable period is stated per item on the product page in the webshop and on the invoice. If no period is stated, 6 months applies.
- Refurbished units are second-hand goods that have been inspected and tested. Signs of use do not constitute a defect.
- At the discretion of Marpat bv, the warranty is limited to repair, replacement or crediting of the item concerned. It does not give rise to any other compensation.
- The warranty lapses in the event of incorrect connection or installation, mains pollution or voltage surges, water or moisture damage, interventions by the Client or by third parties, and use outside the manufacturer’s specifications.
Article 6 — Retention of title
- All goods delivered remain the property of Marpat bv until full payment of the principal sum, interest and costs.
- As long as ownership has not passed, the Client may not sell, pledge or otherwise encumber the goods in any way. In the event of non-compliance, the Client shall owe fixed-rate damages of 50% of the value of the goods concerned.
- The risk passes at the time of delivery.
Article 7 — Complaints about invoices
- Any objection to an invoice must be submitted in writing within 8 days of the invoice date, failing which the invoice is deemed accepted.
- An objection does not suspend the obligation to pay.
Article 8 — Termination and notice
- Marpat bv may terminate the agreement in whole or in part, in writing and with immediate effect, without being liable for any damages, if:
- the Client files for bankruptcy or is declared bankrupt, or an attachment is levied on any part of the Client’s assets;
- the Client is placed under a judicial protection measure;
- judicial reorganisation proceedings or a collective debt settlement procedure are opened in respect of the Client;
- the Client ceases its activities, resolves to dissolve, loses its legal personality, or transfers or merges its business;
- the Client fails to fulfil one or more obligations, or fails to do so on time or properly.
- Upon termination, all mutual claims become immediately due and payable.
- The foregoing is without prejudice to the other rights of Marpat bv, including the right to claim damages or performance.
- An agreement of indefinite duration that does not end with a specific performance may be terminated by either party in writing, subject to a reasonable period of notice. Marpat bv shall never owe damages on account of such termination.
Article 9 — Force majeure
- Force majeure means any circumstance beyond the control of Marpat bv that permanently or temporarily prevents performance, even if that circumstance was foreseeable when the agreement was concluded. This includes in any event war and the threat of war, transport difficulties, fire, flooding, strikes, staff illness, operational disruptions, government measures and supply problems at suppliers.
- In the event of force majeure, Marpat bv may terminate the agreement in whole or in part or suspend performance, without being liable for any damages.
- If Marpat bv has already partly performed before the force majeure occurred, it may invoice that part separately.
- Marpat bv may also invoke force majeure if the circumstance occurs after the date on which it should have performed.
Article 10 — Liability
- Except in the cases mentioned in this article, Marpat bv accepts no liability for damage.
- Liability for indirect damage is excluded at all times, including consequential damage, loss of profit, lost savings, loss of production, downtime costs and third-party claims. Nor is Marpat bv liable for:
- infringement of patents, licences or third-party rights through the use of data provided by the Client;
- damage to or loss of, from whatever cause, raw materials, semi-finished products, models, tools and other items made available by the Client;
- loss or alteration of software, firmware, parameters, configuration or settings on a unit submitted for repair.
- Marpat bv accepts liability only for direct damage caused by an attributable failure or a tort, limited to the amount that was or will be invoiced for the assignment concerned, exclusive of VAT, with a maximum of € 50,000.
- Liability arises only after the Client has given Marpat bv notice of default without delay and in writing, allowing a reasonable period to remedy the failure and with a description detailed enough for Marpat bv to respond adequately.
- There is no liability where the failure is the result of force majeure.
- The limitations in this article do not apply in the event of wilful misconduct or gross negligence on the part of Marpat bv or its management.
- All liability lapses one year after the damage arises, and in any event one year after the end of the agreement to which the damage is most closely related.
Article 11 — Indemnification
- The Client indemnifies Marpat bv against all third-party claims arising from the Client’s own non-performance.
- The Client also indemnifies Marpat bv against third-party claims relating to damage arising in connection with the performance of an assignment.
- If the Client is held liable by a third party for damage for which the Client or that third party may hold Marpat bv jointly liable, the Client shall notify Marpat bv in writing within 8 days.
- The Client shall settle such claims only in consultation with Marpat bv, failing which the Client’s claims against Marpat bv lapse.
Article 12 — Confidentiality
- The parties shall keep confidential all information they receive from each other in the context of the agreement, unless they are legally obliged to disclose it to third parties.
- Marpat bv may make units and technical data available to third parties it engages for the performance of an assignment, insofar as this is necessary for that purpose and subject to the same duty of confidentiality.
Article 13 — Personal data
Marpat bv processes personal data in accordance with its privacy policy. The Client warrants that it is entitled to disclose the data of its contact persons.
Article 14 — Applicable law and competent court
- Agreements between Marpat bv and the Client are governed by Belgian law.
- All disputes that cannot be settled amicably fall within the exclusive jurisdiction of the Enterprise Court of Ghent, Veurne division.
Part II — Special conditions for repairs
This part applies in addition to Part I whenever Marpat bv examines, repairs or refurbishes a unit belonging to the Client. In the event of conflict, Part II prevails.
Article 15 — Nature of the obligation
- The obligations of Marpat bv in a repair are an obligation of means and not an obligation of result. Marpat bv undertakes to examine and repair the unit with the necessary expertise and care, but does not guarantee a successful repair.
- Industrial electronics are often decades old, without available documentation and with parts that are no longer on the market. Some of the units submitted turn out on examination to be beyond repair.
- If no specific error message or fault description is provided, Marpat bv shall itself determine which examination and which interventions are appropriate.
Article 16 — Submission of the unit
- When submitting the unit, the Client shall state the machine type, the unit type and a description of the defect, as well as what has already been attempted.
- Before shipping or handing over the unit, the Client shall make its own backup of software, firmware, parameters and settings. See Article 10.2.
- Antistatic packaging is recommended. Shipping to and from Marpat bv is at the Client’s risk.
Article 17 — Diagnosis and quotation: no cure, no pay
- Marpat bv examines the unit submitted and provides the Client with a quotation.
- If the Client does not accept the quotation, nothing is owed for the examination. The unit is returned at the Client’s expense.
- If, during the repair, the unit turns out to be definitively beyond repair, nothing is owed either.
Article 18 — Exceptions to no cure, no pay
Article 17 does not apply, and the hours worked and parts used are charged in any event, even if the unit turns out to be beyond repair, in the following cases:
- Urgency. The Client expressly requests that work start immediately without a prior quotation. Marpat bv confirms this in writing before starting.
- On-site work. Every intervention at the Client’s premises or at a location designated by the Client is charged at the applicable hourly rate, plus travel costs and travel time, regardless of the result.
- Agreement to the contrary. The parties agree otherwise in writing in advance, for example for particularly complex assignments, for examinations whose scope cannot be estimated in advance, or where the assignment concerns an expert assessment or technical investigation rather than a repair.
Article 19 — Exceeding the quotation
If it becomes apparent during performance that the costs will exceed the amount of the quotation, Marpat bv shall inform the Client and await the Client’s written consent before proceeding.
Article 20 — Parts
- Marpat bv uses new parts or parts of equivalent quality.
- If an original part is no longer available, Marpat bv may use a technically equivalent alternative.
- Replaced parts are not kept, unless the Client expressly requests this when submitting the unit.
Article 21 — Warranty on repairs
- Marpat bv grants a warranty of 6 months from the date of return on repairs.
- The warranty is limited to the work carried out and the parts replaced in the process. It does not cover new defects in other components of the same unit.
- The warranty lapses in the cases listed in Article 5.4.
- Under the warranty, Marpat bv carries out the repair again free of charge. If repair is not possible, the amount invoiced for the repair is credited. Any other compensation is excluded.
Article 22 — Storage and uncollected units
- Marpat bv notifies the Client when the unit is ready, or when the repair will not go ahead.
- Storage costs may be charged from 3 months after that notification.
- Units that have not been collected 6 months after that notification, and for which no shipping instructions have been given, may be destroyed or sold by Marpat bv after a written reminder, without the Client being able to claim any compensation.
Industrial Electronic Repairs / Electronic Design